Optical and crystal-chemical changes in aquamarines and yellow beryls from Thanh Hoa province, Vietnam induced by heat treatment

Optical and crystal-chemical changes in two beryl varieties after the heat treatment were determined using a wide spectrum of analytical methods. Studied aquamarines are generally more enriched in Fe (up to 0.25 apfu) and alkali (up to 0.08 apfu) than yellow beryls (up to 0.07 apfu Fe, up to 0.04 apfu alkali). The determined c / a ratio of 0.997–0.998 classified all our studied beryls as “normal” beryls. While no crystal structure changes were observed in samples heated to 700 °C, those heated to 900 and 1,100 °C exhibited cracks and fissures. Reduced Fe occurred in samples heated between 300 and 700 °C, and subsequent oxidation from 900 to 1,100 °C induced changes in their colour and clarity. The Fe-bearing beryl colour is controlled by the position of the absorption edge and the presence of a broad band attributed to Fe 2+ in the NIR region. Blue colour results from the absorption edge located deeper in the UV region and the presence of broad band in the NIR region. Shift of absorption edge to the visible region at the presence of the broad band gives a yellow colour. Although our studied beryls are enriched in H 2 O I molecule due to their low alkali content, the H 2 O II molecule is also present. The following two dehydration processes were observed: (1) release of one double-coordinating H 2 O II molecule at 300–500 °C and (2) total dehydration at 900–1,100 °C. The observed cracks and fissures likely resulted from channel water release in large beryl crystals.