Branched sulfonated polyimide/functionalized silicon carbide composite membranes with improved chemical stabilities and proton selectivities for vanadium redox flow battery application

Silicon carbide (SiC) was pretreated and functionalized by using α, ω-diaminopropyl polydimethylsiloxane (PDMS) to obtain a novel inorganic filler SiC (PDMS). Then, a series of branched sulfonated polyimide/SiC (PDMS) (bSPI/SiC (PDMS)) composite membranes with different contents of SiC (PDMS) were fabricated for vanadium redox flow battery (VRFB) application. Fourier transform infrared spectra, X-ray diffraction, and field emission scanning electron microscope demonstrate the successful preparation of SiC (PDMS) and bSPI/SiC (PDMS) membranes. The thermogravimetric analysis shows that bSPI/SiC (PDMS)-1.5% membrane has better thermal stability than pure bSPI, bSPI/SiC-1.5%, and Nafion 117 membranes. The ex situ chemical stability test results show that bSPI/SiC (PDMS)-0.5–2.5% composite membranes have better chemical stabilities than pure bSPI membrane. The physicochemical properties of bSPI/SiC (PDMS) membranes, including water uptake, swelling ratio, ion exchange capacity are investigated. Thereinto, bSPI/SiC (PDMS)-1.5% membrane has the highest proton selectivity ( S : 2.99 × 10 5 S min cm −3 ) and was chosen as an optimum VRFB membrane. And the VRFB assembled with bSPI/SiC (PDMS)-1.5% membrane exhibits better battery performance than that assembled with Nafion 117 membrane during 500-time cyclic charge–discharge test at 20–60 mA cm −2 . Above results indicate that as-optimized bSPI/SiC (PDMS)-1.5% membrane has great potential for VRFB application.