The effect of pH and ionic strength on the transport of alumina nanofluids in water-saturated porous media

Alumina nanofluids are one of the most useful nanofluids, especially for increasing the thermal conductivity. Due to importance of porous media in the improvement of heat transfer, this study investigates the transport and retention of gamma alumina/water nanofluid in the water-saturated porous media. For this purpose, alumina nanofluids were introduced to the porous media consisting of water-saturated glass beads possessing various pH values (4, 7 and 10) and different ionic strengths (0.001 M of KCl, CaCl.sub.2, AlCl.sub.3, K.sub.2SO.sub.4, CaSO.sub.4, Al.sub.2(SO.sub.4).sub.3, K.sub.2CO.sub.3 and CaCO.sub.3). Then the break through curve of each experiment was drawn and modeled by combining classical filtration theory with advection-dispersion equation. Single collector efficiency ([eta].sub.0) and attachment efficiency ([alpha]) were calculated by classical filtration theory. Also curve fitting of experiments and modeling was achieved by minimizing the sum of squared residuals, to calculate retardation factor (R) and hydrodynamic dispersion coefficient (D) of each experiment. According to the results, in general, increase in pH and ionic strength will enhance the removal rate coefficient, retardation factor and retention while decreasing the steady-state break through concentration and the hydrodynamic dispersion coefficient. The opposite of this rule was observed and analyzed for aluminum salts. The lowest retention of nanoparticles at 31.04% can be related to their transport in background solution with pH = 4 [[alpha] = [Formula omitted], K.sub.att = [Formula omitted] (min.sup.-1), R = 3.93, D = 0.91 (cm.sup.2 min.sup.-1)], and the highest retention in nanoparticle content of 94.29% was observed in background solution containing CaCO.sub.3 [[alpha] = [Formula omitted], K.sub.att = [Formula omitted] (min.sup.-1), R = 12.02, D = 0.62 (cm.sup.2 min.sup.-1)]. Therefore, chemistry of water plays an important role in transport and retention parameters. The classical filtration theory and the advection-dispersion model are able to perfectly model and quantify the parameters of the alumina nanofluid transport in saturated porous media.