Bioelectricity generation and effect studies from organic rich chocolaterie wastewater using continuous upflow anaerobic microbial fuel cell

[Display omitted] •Upflow MFC efficiently treats chocolaterie wastewater and enhances power production.•A higher organic removal of 70% was achieved by upflow microbial fuel cell.•At 15 h hydraulic retention time, a maximal power density of 98 mW/m2 was obtained.•At OLR of 1.6 gCOD/L d, the achieved...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Fuel (Guildford) 2019-09, Vol.251, p.224-232
Hauptverfasser: Subha, C., Kavitha, S., Abisheka, S., Tamilarasan, K., Arulazhagan, P., Rajesh Banu, J.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:[Display omitted] •Upflow MFC efficiently treats chocolaterie wastewater and enhances power production.•A higher organic removal of 70% was achieved by upflow microbial fuel cell.•At 15 h hydraulic retention time, a maximal power density of 98 mW/m2 was obtained.•At OLR of 1.6 gCOD/L d, the achieved voltage output was found to be 540 mV. The real wastewater generated from chocolateries is complex in nature and has high organic content. Microbial fuel cell (MFC) is the sustainable technology for the treatment of wastewater and simultaneous power generation. In this study an attempt has been made to utilize the chocolaterie wastewater as substrate in upflow anaerobic microbial fuel cell (UAMFC) for simultaneous waste treatment and power generation. The main aim of this study is to evaluate the effect of hydraulic retention time (HRT) and organic loading rate (OLR) on organic removal and power generation. Four bacterial species (Achromobacter insuavis strain BT1 (MF346036.1), Achromobacter insuavis strain B3 (MF346037.1), Bacillus encimensis strain B4 (MF346038.1) and Kocuria flava strain B5 (MF346039.1) were the predominant bacterial strains obtained from anode during biofilm analysis. They play a major role in substrate degradation and power generation. A maximum power density and chemical oxygen demand (COD) removal of 98 mW/m2 and 70% was obtained at a HRT of 15 h. A mathematical modelling, Monod kinetics was done to predict the substrate dependency with that of power production. The model implied that the maximal achievable power density (Vmax) was calculated to be 104.9 mW/m2 at higher substrate concentration of 0.8 g/L.
ISSN:0016-2361
1873-7153
DOI:10.1016/j.fuel.2019.04.052