One-Pot Electrochemical Synthesis of Lead Oxide- Electrochemically Reduced Graphene Oxide Nanostructures and Their Electrocatalytic Applications

In this paper, a new electrochemical method for the cathodic electrodeposition of lead oxide-electrochemically reduced graphene oxide (PbO-ERGO) from an aqueous solution was carried out in one-pot in the same solution containing Pb 2+ and graphene oxide, leading to the direct formation of crystalline thin films at near-room temperature. XRD was employed to determine the crystallinity index of the PbO-ERGO nanostructures. SEM, XPS, EDS, and UV-visible spectroscopy techniques were employed to analyze the morphological, structural, and optical characteristics of the composite materials. Owing to the rapid charge transport in the composite materials of PbO-ERGO, rapid, and uniform photocurrent responses were observed. In addition, the PbO-ERGO composite electrode exhibited a 40 and 130 fold increase in the photocatalytic performance compared to PbO and ERGO electrodes, respectively. Then, the nanocomposite-modified electrode was applied for the nonenzymatic sensing of H 2 O 2 . A linear amperometric response to H 2 O 2 was observed at concentrations in the range from 1×10 -5 to 10 × 10 -3 mol L -1 . The sensitivity and detection limit of the PbO-ERGO electrode were estimated as 2.26 μA mM -1 cm -2 and 2 × 10 -7 mol L -1 , respectively, at a signal-to-noise ratio of 3.0.