CREEP RUPTURE BEHAVIOR OF STEEL PLATE INSERTION TYPE DRIFT PIN JOINT

CREEP RUPTURE BEHAVIOR OF STEEL PLATE INSERTION TYPE DRIFT PIN JOINT

Small clear test specimens with different width to pin-diameter ratio (l/d) were loaded for creep rapture and time to failure was discussed in terms of the effect of length to pin-diameter ratio. The time to failure of the test specimens with l/d from 6.7 to 10 was longer and that of the test specim...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:AIJ Journal of Technology and Design 2019/02/20, Vol.25(59), pp.151-154
Hauptverfasser: TAMURA, Keisuke, NAKAJIMA, Shiro, NAKAGAWA, Takahumi, NAKAJIMA, Shoichi
Format: Artikel
Sprache:eng ; jpn
Schlagworte:
Creep rupture
Duration of load
Failure
l/d
Madison curve
Steel plates
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Small clear test specimens with different width to pin-diameter ratio (l/d) were loaded for creep rapture and time to failure was discussed in terms of the effect of length to pin-diameter ratio. The time to failure of the test specimens with l/d from 6.7 to 10 was longer and that of the test specimens with l/d from 4.3 to 6 was shorter than the time to failure estimated by the Madison Curve. The test results indicated that the duration of load factor for the tested joints should be evaluated with consideration of the effect of the width to pin-diameter ratio.
ISSN:1341-9463
1881-8188
DOI:10.3130/aijt.25.151