Quench Protection of the First 4-m-Long Prototype of the HL-LHC Nb[Formula Omitted]Sn Quadrupole Magnet

The quadrupole magnets for the Large Hadron Collider (LHC) upgrade to higher luminosity are jointly developed by CERN and US-LARP (LHC Accelerator Research Program). These Nb[Formula Omitted]Sn magnets will be protected against overheating after a quench by a combination of heaters bonded to the coil outer surface and coupling-loss induced quench (CLIQ) units. The first 4-m-long prototype magnet, called MQXFAP1, was tested at the Brookhaven National Laboratory in stand-alone configuration. The magnet training campaign, consisting of 18 quenches, was interrupted due to the development of a short circuit between one heater strip and the coil. During the campaign, different quench protection schemes were implemented, including heaters attached to outer and inner layers, one CLIQ unit, and the energy-extraction system. The configuration including outer-layer heaters and CLIQ achieved the fastest current discharge, hence the lowest hotspot temperature. The electro-magnetic and thermal transients after a quench were simulated with the program STEAM-LEDET and found in good agreement.