In situ fibrillation of isotactic polypropylene in ethylene‐vinyl acetate: Toward enhanced rheological and mechanical properties

ABSTRACT In situ microfibrillar reinforced composites with ethylene‐vinyl acetate (EVA) as matrix and isotactic polypropylene (iPP) as dispersed fibrils were successfully fabricated by multistage stretching extrusion with an assembly of laminating‐multiplying elements (LMEs). Four types of EVA with different apparent viscosity were utilized to study the influence of viscosity ratio on the morphology and mechanical properties of EVA/iPP in situ microfibrillar blends. The scanning electron micrographs revealed that the dividing–multiplying processes in LMEs could effectively transform the morphology of iPP phase into microfibrils and the morphology of iPP microfibrils strongly depended on the viscosity ratio. Higher viscosity ratio was favorable for formation of finer microfibrils with narrower diameter distribution. The morphology development of iPP with different viscosity ratio greatly affected the rheological and mechanical properties of EVA/iPP blends. The dynamic rheological results shown that the iPP microfibrils were helpful to increase the storage modulus and loss modulus. The tensile test indicated that the mechanical properties of EVA/iPP blends were controlled by the morphology of iPP phase and the polarity of EVA matrix. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47557.