Study of triazine-based-polyimides composites working as gel polymer electrolytes in ITO-glass based capacitor devices

Two novel gel polymer electrolytes (GPEs) systems using triazine-based-polyimides (TPIs) working as both oxidizing and reducing dopants in the capacitors were prepared in this paper. Due to the advantages of highly flat surface of ITO glass electrodes, sandwich devices made of ITO as electrode mater...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of materials science. Materials in electronics 2019-02, Vol.30 (4), p.3426-3431
Hauptverfasser: Li, Ziyu, Kou, Kaichang, Xue, Jing, Pan, Chen, Wu, Guanglei
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Two novel gel polymer electrolytes (GPEs) systems using triazine-based-polyimides (TPIs) working as both oxidizing and reducing dopants in the capacitors were prepared in this paper. Due to the advantages of highly flat surface of ITO glass electrodes, sandwich devices made of ITO as electrode material can be regarded as typical representatives of the double-layer capacitor. According to the results fitting with the modified Randles model, all chi squared values were lower than 1%. Cyclic voltammetry (CV) method and electrochemical impedance spectroscopy (EIS) method are introduced to explore the change of Faraday capacitance occurred on the electrode/electrolyte interface, as well as the transportation and diffusion of carriers on the electrode/electrolyte interface. The results of CV reveal that when the added TPI-1 concentration reaches 22 mg/mL, the REDOX peaks reach the maximum. The results of EIS show that when the concentration of TPI-2 was 2.8 mg/mL, the Warburg impedance value was only 30.3% of that of the original polymethyl methacrylate gel system. The results convincingly indicate the contribution of TPI-1 to the capacitance, and contribution of TPI-2 to the impedance in the GPEs, which demonstrated the extensive potential application of TPIs in GPEs materials.
ISSN:0957-4522
1573-482X
DOI:10.1007/s10854-018-00617-x