Thermoluminescence properties of La3+, Gd3+,Dy3+ and Ho3+ co‐doped MgAl2Si2O8:Mn4

Thermoluminescence properties of Mn4+‐doped and La3+, Gd3+, Dy3+ and Ho3+ co‐doped MgAl2Si2O8 host phosphors were investigated in detailed and reported for the first time. The phosphors were exposed to β‐ and α‐irradiation and the glow curves appeared at 260–262 ± 2°C and 245–252 ± 2°C, respectively...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Luminescence (Chichester, England) England), 2018-12, Vol.33 (8), p.1346-1357
Hauptverfasser: Uzun, Erdem, Öztürk, Esra, Ozpozan, Nilgün Kalaycioglu
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Thermoluminescence properties of Mn4+‐doped and La3+, Gd3+, Dy3+ and Ho3+ co‐doped MgAl2Si2O8 host phosphors were investigated in detailed and reported for the first time. The phosphors were exposed to β‐ and α‐irradiation and the glow curves appeared at 260–262 ± 2°C and 245–252 ± 2°C, respectively. Thermoluminescence analysis show that the main glow peaks actually consisted of three distinct peaks (P1, P2 and P3). In addition, all the phosphors had a main peak, and many satellite peaks also appeared up to 200°C. Moreover, it was observed that La3+, Gd3+, Dy3+ and Ho3+ dopants in MgAl2Si2O8Mn4+ phosphor can change the thermoluminescence peak intensities, but they did not cause any new glow peak. In addition, when α‐irradiation was used, the glow peaks were shift to a lower temperature region. Kinetic parameters of P1, P2 and P3 were calculated, and it was found that P1 and P3 had first‐order kinetics and P2 had general‐order kinetic parameters. In addition, it was found that when the easy and convenient annealing procedure was applied to the phosphorus, the thermoluminescence signal was measured as stable over many repetitions. The dose sensitivity, reproducibility and fading features of the powdered phosphors were investigated and computerized glow curve deconvolution analysis was also performed. Results showed that thermoluminescence properties of these materials were good but the fading reliabilities were poor and therefore the sintered or single crystal forms should be preferred for their better fading properties.
ISSN:1522-7235
1522-7243
DOI:10.1002/bio.3552