Effect of ageing on stiffness of very loose sand

The paper presents the results of laboratory triaxial compression tests to study the stiffness of very loose Fraser River sands. The stiffness has been shown to be very dependent on the time of confinement prior to shearing and the stress ratio at which the sample is aged. Higher stress ratios resulted in very low initial moduli with no ageing, but the moduli increased by several hundred percent during the first 1000 min of ageing. For ageing at a stress ratio of 1.0 (i.e., isotropic ageing), the initial moduli were higher than those for ageing at high stress ratios, but the stiffness increased by only about 60% during the first 1000 min of ageing. The rate of stiffness increase was approximately linear with the logarithm of time up to ageing times of 10 000 min (>1 week). Ageing at any stress ratio resulted in reduced contractive volumetric strain during subsequent shearing, reflecting a change in soil structure during ageing. The d ε v /d ε a ratio under triaxial compression loading decreased as the ageing stress ratio increased. The results suggest that close attention must be paid to the age of laboratory samples prepared to study the stress–strain response of sands at strains up to about 0.1%, particularly in studies on loose sand.Key words: sands, ageing, creep, modulus.