Structural analysis of SAC solder with Bi addition

The microstructural characterization and properties of solder joints made from lead-free solder alloys SnAg3.0Cu0.5 and SnAg1.0Cu0.5Bi1.0 (composition given in weight %) with Cu plate were studied in this work. The influence of Bi addition to the SAC solder was studied. The melting temperatures, opt...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Welding in the world 2018-11, Vol.62 (6), p.1311-1322
Hauptverfasser:	Hodúlová, Erika, Li, Hong, Šimeková, Beáta, Kovaříková, Ingrid
Format:	Artikel
Sprache:	eng
Schlagworte:	Bismuth Chemistry and Materials Science Composition Lead free Materials Science Metallic Materials Microscopes Microscopy Microstructure Optical microscopy Organic chemistry Plates (structural members) Reliability analysis Research Paper Scanning electron microscopy Soldered joints Solid Mechanics Structural analysis Structural integrity Theoretical and Applied Mechanics Thermal cycling Thermal cycling tests Weight
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The microstructural characterization and properties of solder joints made from lead-free solder alloys SnAg3.0Cu0.5 and SnAg1.0Cu0.5Bi1.0 (composition given in weight %) with Cu plate were studied in this work. The influence of Bi addition to the SAC solder was studied. The melting temperatures, optical microscopy, EDX, and point chemical analyses were observed and evaluated. Thermo-Calc software was used for phase’s composition prediction. Altogether, 1500 cycles were carried out for the thermal cycling test in the range from +150 to − 40 °C where the solder joints’ reliability was assessed due to practice requirement. Optical microscopy and scanning electron microscopy (EDX microanalysis) tests were used for the evolution of microstructure and structural integrity of thermal cycled solder joints.
ISSN:	0043-2288 1878-6669
DOI:	10.1007/s40194-018-0629-z