An investigation of force, surface roughness and chip in surface grinding of SKD 11 tool steel using minimum quantity lubrication-MQL technique

This research aimed to analyze the viability of the minimum quantity of lubricant (MQL) technique towards normal force, tangential force, surface roughness and chip formation in surface grinding of SKD 11 tool steel. The three surface grinding parameters were varied including the type of cooling met...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Soepangkat, Bobby O. P., Agustin, H. C. Kis, Subiyanto, H.
Format: Tagungsbericht
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This research aimed to analyze the viability of the minimum quantity of lubricant (MQL) technique towards normal force, tangential force, surface roughness and chip formation in surface grinding of SKD 11 tool steel. The three surface grinding parameters were varied including the type of cooling method (MQL and dry), table speed, and depth of cut. Based on statistical analysis, depth of cut is the most influential factor which affects the four responses in both dry and MQL grinding. MQL could reduce normal force and tangential force considerably, but produce higher surface roughness. In MQL grinding, the chips removal took place mostly by shearing and fracturing.
ISSN:0094-243X
1551-7616
DOI:10.1063/1.4985459