Understanding of fatigue crack growth behavior in welded joint of a new generation Ni-Cr-Mo-V high strength steel
•Acicular ferrite microstructure was beneficial to the FCG resistance of Ni-Cr-Mo-V high strength steel welded joints.•Both the crack closure model and the two-parameter model were used to correlate the R-ratio effect.•PWHT could never eliminate the WRSs in the extracted fracture mechanics WM sample...
Gespeichert in:
Veröffentlicht in: | Engineering fracture mechanics 2018-05, Vol.194, p.224-239 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | •Acicular ferrite microstructure was beneficial to the FCG resistance of Ni-Cr-Mo-V high strength steel welded joints.•Both the crack closure model and the two-parameter model were used to correlate the R-ratio effect.•PWHT could never eliminate the WRSs in the extracted fracture mechanics WM samples.•Accelerated FCGR with increased specimen thickness was measured for both the BM and the WM.•The fracture mechanism was scrutinized with the help of fractography and fatigue trajectory map.
This study was mainly concerned with the long fatigue crack growth rate (FCGR) of a new generation Ni-Cr-Mo-V high strength steel and its welded joints used in modern marine environment. Several major factors, including stress ratio, microstructure, welding residual stresses (WRSs) and specimen thickness were investigated. Results showed that the weld metal (WM) possessed better resistance to crack propagation relative to the base material (BM) under each stress ratio owing to the interlocking acicular ferrite microstructure and the resultant higher crack closure level. WRSs partly retained in the extracted fracture mechanics samples and noticeably affected FCGR of the WM. Post-welding heat treatment could never eliminate the WRSs and might generate new residual stress distribution. Both the crack closure model and the two-parameter model yielded fairly good consolidation for the R-ratio effect of the BM whereas they failed to correlate the data for the WM because of the retained WRSs. Accelerated FCGR with increased specimen thickness was measured for both the BM and the WM. The fracture mechanism was scrutinized by means of fractography and fatigue trajectory map. The results obtained in the present work are helpful in shedding light on the damage tolerance design of the Ni-Cr-Mo-V high strength steel welded joints employed in modern marine structures. |
---|---|
ISSN: | 0013-7944 1873-7315 |
DOI: | 10.1016/j.engfracmech.2018.03.016 |