Characterization of metallic seals to be used in the waveguide flange coupling of the ITER electron cyclotron upper launcher first confinement system

The ITER Electron Cyclotron Heating Upper Launcher (ECHUL) will be used to drive current locally inside magnetic islands located at the q=2 (or smaller) rational surfaces in order to stabilize neoclassical tearing modes (NTMs). Each of the fours antennas consists of eight beam lines, totaling 12.8m that are designed for the transmission of up to 1.5MW of mm-wave power at 170GHz, with at least 90% of the power in the main HE11 mode. Each transmission line consists of a Z shaped set of straight corrugated, aluminum alloy waveguides connected by miter bends with a nominal inner diameter of 50mm. The FCS system also encompasses intrinsic components such as: closure plate, mm-waveguide taper, isolation valve, diamond window and an EU-US interface waveguide. All FCS components are connected via a dedicated flange coupling, with a bolted connection, comprising of two concentric metallic seals in order to satisfy the SIC-1 requirements. The coupling shall be capable of resisting the applied external loads and displacements, including thermal cycles due to ohmic losses in the transmission line, and also adhere to the matting of different materials (EN AW-6082, CuCrZr, SS 316L) while maintaining ultra-high vacuum tightness (10−8mbar). The present study will use a dedicated experimental apparatus for the characterization of the mechanical and vacuum properties of a single metallic seal under compression, with applied heat flow. In order to ensure reproducibility of the components mechanical characteristics, randomly chosen metallic seals of each diameter have been tested from two independent manufactures (A and B).