Development of a position-sensitive CZT detector with coplanar grid electrode

Development of a position-sensitive CZT detector with coplanar grid electrode

The finite–element analysis was done to optimize position-sensing coplanar grid electrode geometry. CdZnTe crystals manufactured by PAM-XIAMEN with customized electrode geometry have been tested. After digitizing pre-amplifier signals, trapezoidal digital filter was adopted to enhance the signal to...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of radioanalytical and nuclear chemistry 2018-06, Vol.316 (3), p.1221-1225
Hauptverfasser: Kim, B. J., Lee, K. B., Lee, J. M., Park, T. S., Hwang, S. H.
Format: Artikel
Sprache:eng
Schlagworte:
Cadmium zinc tellurides
Chemistry
Chemistry and Materials Science
Detection equipment
Diagnostic Radiology
Digital filters
Digitization
Electrodes
Electrons
Energy measurement
Energy resolution
Hadrons
Heavy Ions
Inorganic Chemistry
Nuclear Chemistry
Nuclear Physics
Physical Chemistry
Position measurement
Position sensing
Signal to noise ratio
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The finite–element analysis was done to optimize position-sensing coplanar grid electrode geometry. CdZnTe crystals manufactured by PAM-XIAMEN with customized electrode geometry have been tested. After digitizing pre-amplifier signals, trapezoidal digital filter was adopted to enhance the signal to noise ratio. Energy resolution of 2.7% FWHM at 662 keV γ-ray energy was obtained. The measured results show the dramatic improvement with position-sensing technique.
ISSN:0236-5731
1588-2780
DOI:10.1007/s10967-018-5890-5