Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy

Mg–Zn–Y–Nd alloy was prepared by casting and hot extrusion. The microstructure and mechanical properties of OM, SEM, XRD, TEM, and tensile tests were investigated with casting and hot extruded alloys. The results demonstrate that in a casting Mg–Y–Nd–Zr alloy, the α-Mg matrix is separated into the cell structure by a discontinuously distributed coarse Mg 24 Y 5 /α-Mg eutectic structure and fine Mg 12 Nd particles. TEM analysis shows that the Mg 12 Nd and Mg 24 Y 5 phases have the orientation of 001 Mg 12 Nd / / 0221 α − Mg , and 111 Mg 24 Y 5 / / 0001 α − Mg and 10 1 ¯ Mg 24 Y 5 / / 10 1 ¯ 0 α − Mg , respectively. The hot extrusion separates the Mg 24 Y 5 /α-Mg eutectic structure into fragments and aligns fragmentary Mg24Y5 particles along the extrusion direction. The interaction of hot extrusion and strengthening particles refines the α-Mg matrix greatly. Moreover, large strains result in the stacking faults of the matrix. As compared to the casting alloy, the hot-extruded one exhibits high yield strength, ultimate tensile strength, and elongation, which should be ascribed to the grain fineness, optimum distribution of strengthening particles and multiple substructures.