Single-walled carbon nanotube for shape stabilization and enhanced phase change heat transfer of polyethylene glycol phase change material
The SEM observations present that PEG was dispersed homogenously in all of the PEG/SWCNs nanocomposites. When compared to the pure PEG, the thermal conductivity was significantly improved from 162% to 1329% in the solid state, while in the liquid state, the thermal conductivity was enhanced from 21%...
Gespeichert in:
Veröffentlicht in: | Energy conversion and management 2017-07, Vol.143, p.96-108 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The SEM observations present that PEG was dispersed homogenously in all of the PEG/SWCNs nanocomposites. When compared to the pure PEG, the thermal conductivity was significantly improved from 162% to 1329% in the solid state, while in the liquid state, the thermal conductivity was enhanced from 21% to 533% with the different SWCNs mass fractions ranging from 2% to 10%.
[Display omitted]
•A nanocomposite consisting of polyethylene glycol (PEG) and single-walled carbon nanotube (SWCN) is prepared.•PEG loading with excellent shape-stability could attain 98%.•Effects of SWCN on the thermal performance of the nanocomposite are investigated.•SWCN enhances the thermal conductivity both in solid and liquid state.
In order to simultaneously stabilize the shape and enhance the heat transfer efficiency of a typical polyethylene glycol (PEG) phase change material (PCM), a family of novel nanocomposites consisting of single-walled carbon nanotubes (SWCNs) and PEG was tailor-made via a facile impregnation method. The effects of SWCNs loadings ranging from 2% to 10% on the chemical structure, thermal performance and heat transfer enhancement of PEG were investigated experimentally. The fabricated nanocomposite exhibits high adsorption of PEG as high as 98% and can completely preserve its original shape without any PEG leakage even when subjected to a 400 melt-freeze cycle. The maximum adsorption of PEG is the highest value in literature up to now. The melting point of PEG/SWCNs nanocomposite shifts to a lower temperature while the freezing point shifts to a higher temperature while compared to the pure PEG, resulting in a substantial reduction of the supercooling degree. Above all, the thermal conductivity was found to increase with SWCN loadings whether in solid or liquid state. In detail, only with a small SWCN loading of 4%, a dramatically high, 375% enhancement is obtained in the solid state and a relatively high enhancement of 121% is achieved in the liquid state. |
---|---|
ISSN: | 0196-8904 1879-2227 |
DOI: | 10.1016/j.enconman.2017.03.065 |