Kinetics of CO2 methanation on a Ru-based catalyst at process conditions relevant for Power-to-Gas applications
[Display omitted] •0.5wt.% Ru/Al2O3 catalyst is used for the methanation of concentrated CO2 streams.•Catalyst performance is assessed in a wide range of conditions, including P>1 at.•The catalyst is highly selective to CH4, with minor amounts of CO as byproduct.•Literature rate laws aren’t satis...
Gespeichert in:
Veröffentlicht in: | Applied catalysis. B, Environmental Environmental, 2018-06, Vol.225, p.354-363 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | [Display omitted]
•0.5wt.% Ru/Al2O3 catalyst is used for the methanation of concentrated CO2 streams.•Catalyst performance is assessed in a wide range of conditions, including P>1 at.•The catalyst is highly selective to CH4, with minor amounts of CO as byproduct.•Literature rate laws aren’t satisfactory in describing data collected under pressure.•A novel rate expression is proposed for CO2 methanation, accounting for the kinetic inhibition of H2O.
In this paper we show that a 0.5wt.% Ru/γ-Al2O3 catalyst is appropriate to carry out the Sabatier reaction (CO2 methanation) under process conditions relevant for the Power-to-Gas application and we provide a kinetic model able to describe the CO2 conversion over a wide range of process conditions, previously unexplored. To achieve these goals, the effects of feed gas composition (H2/CO2 ratio and presence of diluents), space velocity, temperature and pressure on catalyst activity and selectivity are investigated. The catalyst is found stable when operating over a wide range of CO2 conversion values, with CH4 selectivity always over 99% and no deactivation, even when working with carbon-rich gas streams. The effect of water on the catalyst performance is also investigated and an inhibiting kinetic effect is pointed out. Eventually, the capacity of kinetic models taken from the literature to account for CO2 conversion under the explored experimental conditions is assessed. It is found that the kinetic model proposed by Lunde and Kester in 1973 (J. Catal. 30 (1973) 423) is able to describe satisfactorily the catalyst behavior in a wide range of CO2 conversion spanning from differential conditions to thermodynamic equilibrium, provided that a new set of kinetic parameters is used. It is shown however that a better fitting can be achieved by using a modified kinetic model, accounting for the inhibiting effect of H2O on CO2 conversion rate. |
---|---|
ISSN: | 0926-3373 1873-3883 |
DOI: | 10.1016/j.apcatb.2017.11.066 |