The Microstructure and Mechanical Properties of Friction Welded Cast Ni3Al Intermetallic Alloy

Ni 3 Al alloy was bonded with itself by friction welding. Various friction speeds, friction durations and friction pressures were tested to find optimum friction welding parameters, and the effects of the welding parameters on the welding interface, microstructure and mechanical properties were inve...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Transactions of the Indian Institute of Metals 2018-03, Vol.71 (3), p.775-779
Hauptverfasser:	Celikyürek, Ibrahim, Baksan, Bedri, Torun, Osman, Arıcı, Gökhan, Özcan, Akın
Format:	Artikel
Sprache:	eng
Schlagworte:	Chemistry and Materials Science Corrosion and Coatings Friction welding Intermetallic compounds Materials Science Mechanical properties Metallic Materials Microhardness Microstructure Nickel aluminides Optical microscopy Optical properties Shear strength Technical Paper Tribology Welded joints Welding parameters
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	Ni 3 Al alloy was bonded with itself by friction welding. Various friction speeds, friction durations and friction pressures were tested to find optimum friction welding parameters, and the effects of the welding parameters on the welding interface, microstructure and mechanical properties were investigated. SEM and optical microscopy were carried out to examine the microstructural variations of the welding interfaces. Also, the microhardness distribution across the interface was evaluated considering the microstructural variations. In addition, the shear strengths of welded parts were measured. It was observed that the shear strengths of welds were dependent on welding time, friction pressure and friction speed. The maximum shear strength was found as 354 MPa.
ISSN:	0972-2815 0975-1645
DOI:	10.1007/s12666-016-0888-6