Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g −1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO 4 2− in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO 3 − on adsorption could be ascribed to the increased solution pH with the addition of the HCO 3 − . Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L −1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.