Determination of the thermal modification degree of beech wood using thermogravimetry

Thermal modification is one of the environmental friendly wood preservation technologies. During this process, changes of the main woody cell wall components occur, which lead to improved dimensional stability, lower hygroscopicity and improvement in biological durability. Several chemical reactions which occur during thermal treatment of wood caused changes in wood properties. During TG measurements, thermal decomposition reactions, which was not completed during previous thermal modification process, continued in wood samples, meaning that more thermally treated samples exhibited lower mass losses in a certain or whole temperature range up to 600 °C. Therefore, mass loss, obtained within selected temperature range, could be used as a marker of previous thermal treatment. The aim of the present work is to evaluate suitability of a thermogravimetric method (TG) for determination of a degree of thermal treatment of beech wood. On the basis of thermally untreated sample and those which were thermally modified at 180, 190, 200, 210, 215 and 220 °C in the absence of oxygen, respectively, and with known values of mass loss during the modification processes, several calibration curves were constructed. They represent mass loss in a certain temperature range during TG measurement versus mass loss during previous thermal modification. In a temperature range from 130 to 300 °C and from 130 to 320 °C under nitrogen atmosphere, a linear dependence was observed; correlation coefficients R 2 were 0.87 and 0.91, respectively. In wider temperature range and under air atmosphere, lower correlation coefficients were obtained. High correlation coefficient, higher than 0.95, was observed in a temperature range from 25 to 130 °C under both atmospheres. In this region, dehydration due to rehydration of thermally modified samples occurs. The results of this work were compared with those obtained for Norway spruce.