Bond strength of resin cements to leucite-reinforced ceramics: part 2 – after one-year aging in water

Objective: The aim of this study was to compare the shear bond strength (SBS) of two resin cements bonded to four leucite-reinforced ceramics after one week and one year of aging. Material and methods: Forty ceramic blocks (4 mm wide, 14 mm length, and 2 mm thick) were used (1 week) and reused at the back side (1 year). The blocks were abraded with aluminum oxide (90 µm) and randomly divided into eight groups for each time. Two dual resin cements (RelyX ARC and RelyX U200 self-adhesive, 3M ESPE) were bonded to ceramics Creapress (CRE - Creation / Klema), Finesse All-Ceramic (FIN - Dentsply / Ceramco), IPS Empress Esthetic (IEE - Ivoclar Vivadent) and Vita PM9 (PM9-Vita). For each resin, time, and ceramic block, after applications of the 10% hydrofluoric acid (for 1 min) and silane, 3 Tygon cut tubes were positioned over each block and filled in with the resin cements (light-cured for 40 s). The tubing molds were removed to expose the bond specimens as cylinders (area=0.38 mm2) stored in relative humidity at 24±2°C for one week and at 37±2°C for one year. All bonds were tested in an Instron in shear (applied of the base cylinder with a thin wire - 0.25 mm) at speed of 0.5 mm/min, until failure. Results: The results were analyzed by ANOVA (resin cements, ceramic systems, and time) and Tukey test (p