Grain coarsening behaviour of solution annealed Alloy 625 between 600–800°C

As with all alloys, the grain structure of the nickel-base superalloy 625 has a significant impact on its mechanical properties. Predictability of the grain structure evolution in this material is particularly pertinent because it is prone to inter-metallic precipitate formation both during manufacture and long term or high temperature service. To this end, analysis has been performed on the grain structure of Alloy 625 aged isothermally at temperatures between 600 and 800°C for times up to 3000h. Fits made according to the classical Arrhenius equation describing normal grain growth yield an average value for the activation energy of a somewhat inhomogeneous grain structure above 700°C of 108.3±6.6kJmol−1 and 46.6±12.2kJmol−1 below 650°C. Linear extrapolation between 650 and 700°C produces a significantly higher value of 527.7±23.1kJmol−1. This result is ultimately a consequence of a high driving force, solute-impeded grain boundary migration process operating within the alloy. Comparison of the high and low temperature values with the activation energy for volume self-diffusion and grain boundary diffusion identifies the latter as the principle governing mechanism for grain growth in both instances. A decrease in the value of the time exponent (n) at higher temperatures despite a reduction in solute drag is attributable to the Zener pinning imposed by grain boundary M6C and M23C6 particles identified from Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray Spectroscopy (EDXS) analysis. Vickers hardness results show the dominance of intermetallic intragranular precipitates in the governance of the mechanical properties of the material with grain coarsening being accompanied by a significant increase in hardness. Furthermore, the lack of any correlation with grain growth behaviour indicates these phases have no significant effect on the grain evolution of the material.