Influence of elastic recoil on the hole precision when reaming thin-walled components

Influence of elastic recoil on the hole precision when reaming thin-walled components

The finite-element method is used to investigate the elastic surface displacement of a hole reamed in a lug at points where the radial cutting force is applied. On that basis, formulas are derived for determining the distortion of the machined hole surface, with allowance for all the relevant factor...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Russian engineering research 2017-08, Vol.37 (8), p.704-707
Hauptverfasser: Zheleznov, G. S., Andreeva, S. G.
Format: Artikel
Sprache:eng
Schlagworte:
Cutting force
Engineering
Engineering Design
Finite element method
Reaming
Recoil
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The finite-element method is used to investigate the elastic surface displacement of a hole reamed in a lug at points where the radial cutting force is applied. On that basis, formulas are derived for determining the distortion of the machined hole surface, with allowance for all the relevant factors.
ISSN:1068-798X
1934-8088
DOI:10.3103/S1068798X17080226