Comparative studies of pure, Sr-doped, Ni-doped and co-doped CaCu3Ti4O12 ceramics: Enhancement of dielectric properties

The CaCu3Ti4O12 ceramic, CCTO, remains as the best material due to its high dielectric constant. In this context, Sr-doped CCTO, Ni-doped CCTO and Sr,Ni co-doped CCTO ceramics were prepared by the solid-state reaction method and were sintered at 1100 °C for 24 h in order to enhance the geometric microstructure and dielectric properties. X-ray diffraction data refined via rietveld method for CaCu3Ti4O12 confirms the formation of single phase. SEM micrographs revealed that the substitution of Sr2+ and/or Ni2+ on Ca and Cu sites respectively increase the grain size of CaCu3Ti4O12 ceramics. Raman scattering measurements shows the presence of TiO2 phase at grain boundaries, which is an important parameter to reduce the dielectric loss of samples. It is found that Sr,Ni co-substitution in CCTO leads to the best dielectric measurements at low frequency. The highest grain boundary resistance value is also obtained for co-doped CCTO sample in the order of 1.84 106 Ω. This value is 10 times higher than pure CCTO. Meanwhile, the nonlinear coefficient values were improved, whereas, the breakdown electric field and leakage current decreased for all ceramic samples and co-doped CCTO is considered as the best conductive grain and insulating grain boundary. •Structure of ceramic samples is remained Cubic.•The grain size was increased by adding Sr2+ and Ni2+ doping ions.•TiO2 phase revealed by Raman scattering in CCTO grain boundaries.•(Sr,Ni) co-doped CCTO revealed the best dielectric properties at low frequency.