Effect of annealing time on properties of spinel LiNi0.5Mn1.5O4 high-voltage lithium-ion battery electrode materials prepared by co-precipitation method

In this wok, a series of LiNi 0.5 Mn 1.5 O 4 (LNMO) samples with an octahedral shape entirely composed of (111) crystal planes were prepared by calcining the mixture of the precursor Ni 0.25 Mn 0.75 (OH) 2 and LiOH·H 2 O at 800 °C for 15 h in air, followed by annealing them at 600 °C for different dwelling times. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and several electrochemical technologies were used to investigate the effect of annealing time on properties of the LNMO samples. XRD analysis indicates that the lattice parameters of the LNMO samples show a decreasing trend with increasing of annealing time, and the impurity peaks become less apparent for the sample annealed for 6 h and almost disappear for the samples annealed for 9 and 24 h. SEM results show that the annealing time has no obvious influence on the morphologies of the LNMO samples. Electrochemical measurements show that the electrochemical performances (capacity, cycle life, and rate capability) of the samples annealed for 6, 9, and 24 h are better than those of the unannealed sample, and the sample annealed for 9 h shows the best electrochemical properties among them due to its superior electrochemical kinetics of Li + insertion/desertion.