Preparation of Titanium Metal Matrix Composites Using Additive Manufacturing

In this work, the “4M-System” (Machine for Multi-Material-Manufacturing) has been developed by RHP Technology for the manufacturing of Titanium Metal Matrix Composites. This equipment allows the Additive Layer Manufacturing (ALM) of large structures and uses a Plasma Transferred Arc (PTA) as a heat source for depositing feedstocks (powder/wire) layer by layer onto a substrate. Test coupons, made of Titanium powders and having different concentrations of B4C particles, were deposited to form Metal Matrix Composites. Various processing parameters such as deposition rate, travel speed of the torch as well as plasma parameters (power/current/gas flow) were assessed for getting pore- and crack-free samples. After deposition, the specimens were cut and the cross-sections were analysed by optical- and scanning electron microscopy. Furthermore, the hardness, Young’s Modulus, and tensile strength were measured. Ti-Metal Matrix Composite materials resulted in higher strength and Young´s Modulus in comparison to the pure Ti-metal matrix. Using the 4M-System, B4C particle reinforced Ti-MMC’s were successfully manufactured. Thus the 4M-System proved the capability of joining multi-material concepts, which also promises to create graded concentrations of reinforcement in the material.