Optical excitation-enhanced sensing properties of acetone gas sensors based on Al 2 O 3 -doped ZnO

Purpose The purpose of this research is to synthesize Al2 O3 -ZnO thick films, study the effect of doping and optical excitation on their sensing properties and introduce an attractive candidate for acetone detection in practice. Design/methodology/approach ZnO nanoparticles doped with Al2 O3 were prepared by sol-gel method and characterized via X-ray diffraction and field-emission scanning electron microscopy. The sensing properties to acetone were investigated with an irradiation of UV. The sensing mechanism was also discussed with UV-Vis spectroscopy. Findings The doping of Al2 O3 promoted the sensing response and stability of ZnO nanoparticles. The optimum performance was obtained by 4.96 Wt.% Al2 O3 -ZnO. The response to acetone (1,000 ppm) was significantly increased to 241.81, even just at an operating temperature of 64°C. It was also demonstrated that optical excitation with UV irradiation greatly enhanced the sensing response and the sensitivity can reach up to 305.14. Practical implications The sensor fabricated from 4.96 Wt.% Al2 O3 -ZnO exhibited excellent acetone-sensing characteristics. It is promising to be applied in low power and miniature acetone gas sensors. Originality/value In the present research, the optimum performance was obtained by 4.96 Wt.% Al2 O3 -ZnO at a low operating temperature of 64°C. The sensing properties were enhanced significantly with optical excitation, and the sensing mechanism was discussed with UV-Vis spectroscopy which has been reported rarely before.