Mechanical behavior of SiC joints brazed using an active Ag‐Cu‐In‐Ti braze at elevated temperatures

The behavior of SiC ceramic joints brazed with commercially available Incusil ABA (Ag‐32.25Cu‐12.5In‐1.25Ti, in wt.%) was characterized especially with respect to the mechanical performance at temperatures up to 550°C using four‐point bending and torsional shear tests. The failure mechanisms with changing temperature were investigated with the aid of fractography. Additionally, the microstructure of brazed specimens was characterized in detail by high resolution scanning electron microscopy. The test geometry and setup for the high temperature torsional shear test is presented. The change in mechanical behavior of the joints as a function of temperature is shown and discussed. The brazed joints interestingly showed that flexural bending strength was maintained with only a small decrease up to 300°C. Above 300°C, the bending strength decreased much faster. For the first time, this joint system was characterized in torsional shear test at temperatures up to 550°C to achieve the intrinsic shear strength values. Very strong joints were achieved, resulting in failure through the ceramic base materials up to (torsional shear) testing temperatures of 400°C. The results indicate that SiC joints brazed with Incusil ABA exhibit excellent mechanical performance for applications up to 300°C.