Casting of Iron Aluminides

Iron aluminides form an interesting class of materials which combine excellent corrosion and oxidation resistance with good mechanical properties at moderate to high temperature (up to 500 °C). These materials, however, suffer from low room-temperature ductility (under 5% elongation in tension), which is mostly due to environmental effects. Casting is a processing route traditionally applied to brittle alloys (e.g., gray cast irons), but to cast a part without defects, several thermochemical properties are needed, as well as information on the tendency of the alloy to form foundry defects (e.g., shrinkage voids, pores). The present work aims to provide this information using parts produced on laboratory scale. In particular, the solidification contraction and the efficiency of TiB 2 as inoculant are investigated. Three alloys with nominal composition (in at.%) Fe28Al, Fe28Al6Cr, and Fe28Al6Cr1Ti (about 1.5 kg for each melt) were melted in an induction furnace under argon flux protection using conventional raw materials (carbon steel, commercial aluminum, metallic chromium, and commercial ferrotitanium). The resulting melts were treated by adding Al-TiB 2 master alloy used in the aluminum industry and poured into “staircase” molds, designed to investigate feeding distance effects in complex parts. Characterization of the microstructure of the alloys revealed that alloys Fe28Al and Fe28Al6Cr showed κ-carbide precipitation, while alloy Fe28Al6Cr additionally showed chromium carbides at dendritic boundaries. Addition of 1 wt.% Ti in alloy Fe28Al6Cr1Ti changed the solidification microstructure, refining the dendrite morphology and forming TiC-containing eutectic in interdendritic spaces.