Physical and numerical modelling of a geogrid-reinforced incremental concrete panel retaining wall

The paper presents the numerical modelling details using the finite difference method (FDM) to simulate the performance of a well-instrumented geogrid-reinforced incremental concrete panel soil retaining wall. Two different constitutive models were investigated for the backfill soil (linear elastic-plastic model and nonlinear elastic-plastic model). Both constant stiffness and strain-dependent secant stiffness models were used for the reinforcement elements. The paper provides valuable lessons to modellers to simulate the performance of this type of earth retaining structure. For example, parametric investigation of the effect of a constant Young's modulus ranging from 40 to 120 MPa for the linear-elastic Mohr-Coulomb model had only minor influence on the wall facing displacements and reinforcement loads. However, the choice of magnitude of transient compaction pressure near the facing can result in large differences in facing displacements. The paper also demonstrates that the method of construction including the location, sequence, and stiffness of the temporary supports used to construct the wall plays an important role on measured and predicted wall performance. The physical measurements reported in this paper provide a benchmark for numerical modellers to verify other numerical models for walls of the type investigated here.