Integration Methods of Sensors in FRP Components

Structural health monitoring is an important research topic in the field of fiber reinforced plastics (FRP). An effective way to detect defects or overloads in these FRP has still not been found. One way to monitor the actual state of FRP components is via integrated sensors. Integrating current standard sensors negatively affects the flux of force. Therefore investigations about integration methods of sensors in FRP components have been made. The integration of an optical fiber sensor into FRP profiles via a pultrusion process was investigated. It could be shown that the pultrusion process is suitable method for the integration of fiber optic sensors for strain measurements. Another investigated sensor principle was the integration of piezoelectric polyvinylidene fluoride (PVDF) fibers via a vacuum assisted process. The PVDF fibers were integrated into 3-point bending specimen and the piezoelectric effect was tested with and without polarization. The investigation showed that it is possible to measure the piezoelectric effect of PVDF fibers integrated into a 3-point bending test specimen. It could also be shown that carbon fibers can be used as textile electrodes for the measurement of the generated charge on the PVDF surface.