Biomimetic Nanofur: Nanofur for Biomimetic Applications (Adv. Mater. Interfaces 4/2014)

Biomimetic Nanofur: Nanofur for Biomimetic Applications (Adv. Mater. Interfaces 4/2014)

Nanofur is produced by hot pulling, a highly scalable molding technique for the fabrication of biomimetic surfaces densely covered with nanohair. This nanofur can be used for various biomimetic applications, such as self‐healing, air retention, and oil‐water separation as demonstrated by H. Hölscher...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Advanced materials interfaces 2014-07, Vol.1 (4), p.n/a
Hauptverfasser: Röhrig, Michael, Mail, Matthias, Schneider, Marc, Louvin, Henri, Hopf, Andreas, Schimmel, Thomas, Worgull, Matthias, Hölscher, Hendrik
Format: Artikel
Sprache:eng
Schlagworte:
biomimetic surfaces
hot pulling technique
nanofur
nanohair
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Nanofur is produced by hot pulling, a highly scalable molding technique for the fabrication of biomimetic surfaces densely covered with nanohair. This nanofur can be used for various biomimetic applications, such as self‐healing, air retention, and oil‐water separation as demonstrated by H. Hölscher and co‐workers in article 1300083. The SEM image shows the fractal surface topography of nanofur fabricated from polycarbonate.
ISSN:2196-7350
2196-7350
DOI:10.1002/admi.201470022