use of tracers to assess drill-mud penetration depth into sandstone cores during deep drilling: method development and application

For the utilization of deep saline aquifers in the frame of geotechnical use, such as geological sequestration of CO₂, H₂ or energy storage, a baseline characterization of pristine reservoir rock cores is required to monitor changes in the indigenous microbial communities and pore fluids, and to study alterations in rock characteristics resulting from interaction with geological storage technologies. However, drilling procedures and technical fluids, particularly drill mud, are sources of core contamination. To measure the penetration of drill mud into the cores, three tracers (fluorescein, microspheres, and 4′,6-diamidino-2-phenylindole stained bacteria) were tested under laboratory conditions. The flow of drill mud into core samples was induced by applying uniaxial pressure differentials to the core, and the penetration depth was microscopically determined for each tracer. Fluorescein was extracted from the rock samples and quantified fluorometrically. The results indicate that all tested tracers are suitable for tracking drill-mud penetration. The actual penetration depth seems to be related to differences in mineral composition and texture as well as microfractures. Among all tested tracers, fluorescein labelling is the simplest, cheapest and most accurate method for analyzing the contamination of rock cores by technical fluids. The application of this tracer was successfully applied during two deep drilling campaigns at the CO₂ storage pilot site in Ketzin, Germany. The results highlight that the use of tracers is indispensable to ensure the quality of core samples for microbiological and biogeochemical analysis.