Optimization of Processing Variables in Wheat Straw Particleboard for Manufacturing Pallets

The goal of this work was to make particleboards for manufacturing pallets from wheat straw using low cost urea formaldehyde (UF) resin adhesive. The wheat straws were subject to steam explosion pretreatment to improve bondability with UF resin. Particleboards were obtained from the steam explosion pretreated wheat straws with UF resin. Particleboard manufacturing parameters, such as pressing time, temperature and board density, were optimized to achieve high performance panel board for pallets. The optimum parameters were found to be: hot press temperature 170 °C, hot press time 40 s/mm, resin application ratio 10%, and straw particle size 12 mm. Under the optimum conditions particleboards met the mechanical requirements for the industrial use particleboards based on the Chinese National Standard for Particleboard and were able to make pallets.