INFLUENCE OF GEOMETRIC PARAMETERS ON THE MINIMUM THICKNESS OF THE HARDENED LAYER OF THE TOOTH FLANK

INFLUENCE OF GEOMETRIC PARAMETERS ON THE MINIMUM THICKNESS OF THE HARDENED LAYER OF THE TOOTH FLANK

This article describes the effect of the geometrical parameters of the standard involute and non-standard convex-concave (C-C) gearing on the thickness of the hardened layer. The thickness of hardened layer is important from the aspect of wear on gearing. In case of involute gearing is the thickness...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Annals of Faculty Engineering Hunedoara 2013-01, Vol.11 (1), p.53
Hauptverfasser: Tököly, Pavol, Bosanský, Miroslav
Format: Artikel
Sprache:eng
Schlagworte:
Gears
Geometry
Parameter estimation
Thickness measurement
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This article describes the effect of the geometrical parameters of the standard involute and non-standard convex-concave (C-C) gearing on the thickness of the hardened layer. The thickness of hardened layer is important from the aspect of wear on gearing. In case of involute gearing is the thickness of the hardened layer defined by various authors, what is on the other hand determinated also by the standard STN 01 4686-5. In case of C-C gearing there are not available any standards, and therefore it is possible to determine the thickness of the hardened layer only by the means of modern simulation methods. [PUBLICATION ABSTRACT]
ISSN:1584-2665
2601-2332