Soot and Tar Production in a Jet-Stirred/Plug-Flow Reactor System: High and Low C2H2 Concentration Environments

We demonstrate that carbon molecular weight growth chemistry can continue to occur when polycyclic aromatic hydrocarbons (PAH), produced by localized fuel rich pockets within an incinerator, disperse into the near-stoichiometric bulk flow characteristic of the unit. Naphthalene, a model PAH, was added to a near-stoichiometric (φ = 1.2) post-flame combustion flow produced by premixed C 2 H 4 /O 2 /N 2 /Air combustion in a jet-stirred/plug-flow reactor system (JSR/PFR), and the results compared against those from a fuel rich (φ = 2.2) post-flame combustion flow without naphthalene addition. In both experiments, the PFR was sampled for soot (CH 2 Cl 2 insolubles), tar (CH 2 Cl 2 solubles; PAH), C 2 H 2 and other light gases. The results indicate that naphthalene addition to the φ = 1.2 flow produces PAH in the naphthalene (M W = 128) to cyclopenta[cd]pyrene(MW = 226) fraction at exactly the same total mass concentration as observed in the φ = 2.2 flow without naphthalene addition. Similarly, the rate of growth of soot mass is approximately the same in both cases. In contrast, the concentration of high molecular weight PAH (PAH > MW 226) produced is 3 times less, and that of C 2 H 2 is 100 to 600 times less in the φ = 1.2 flow with C 10 H 8 addition than in the φ = 2.2 flow without C 10 H 9 addition. These data suggest that under our reactor conditions, PAH in the 128 to 226 amu molecular weight range are more important contributors to the soot growth process than either C 2 H 2 or high molecular weight PAH.