Focusing Bistatic SAR Data in Airborne/Stationary Configuration

This paper presents a frequency-domain-based focusing algorithm for the bistatic synthetic aperture radar (BiSAR) data in airborne/stationary configuration. In this bistatic configuration, only the moving platform contributes to the azimuth modulation, whereas the stationary platform introduces a range offset (RO) to the range migration trajectories of targets at the same range. The offset is determined by the azimuth position of different targets with respect to the stationary platform. Since the RO is position dependent, monostatic SAR imaging algorithms are not able to focus the bistatic data collected in this configuration. In this paper, an analytical bistatic point-target reference spectrum is derived, and then, a frequency-domain-based algorithm is developed to focus the bistatic data. It uses an interpolation-free wavenumber-domain algorithm as a basis and performs a range-variant interpolation to correct the position-dependent RO in the image domain after coarse focusing. The proposed algorithm is validated by the simulated data and the real BiSAR data acquired by the Forschungsgesellschaft fu¿r Angewandte Naturwissenschaften's airborne SAR system, PAMIR, in December 2007. In this BiSAR experiment, an X-band transmitter was stationary operated on a hill with PAMIR as the receiver mounted on a Transall C-160.