HTS Josephson Junction Cantilever Microscopy of Microwave Devices

Josephson junctions from the high-temperature superconductor YBa 2 Cu 3 O 7 are routinely used on a cantilever to detect spatially resolved microwave emission from room temperature microwave devices. The Josephson junctions are operated in a temperature range between 40 K to 80 K cooled by a cryo-co...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on applied superconductivity 2009-06, Vol.19 (3), p.719-721
Hauptverfasser: Stewing, F., Brendel, C., Schilling, M.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Josephson junctions from the high-temperature superconductor YBa 2 Cu 3 O 7 are routinely used on a cantilever to detect spatially resolved microwave emission from room temperature microwave devices. The Josephson junctions are operated in a temperature range between 40 K to 80 K cooled by a cryo-cooler. Near field imaging is accomplished with operating distances of the cooled Josephson cantilever to the surface of the device under test down to 15 mum . Due to the realization as an active cantilever, a topographic image of the device under test as well as the microwave power distribution can be obtained. We discuss measurements of the three-dimensional radiation distribution above the chip surface under investigation at frequencies ranging from 14 to 762 GHz. We demonstrate characterization of passive microwave devices by measurements of an edge coupled filter, a branch-line coupler and an oversized waveguide.
ISSN:1051-8223
1558-2515
DOI:10.1109/TASC.2009.2019428