A biomechanical and ergonomic evaluation of patient transferring tasks: bed to wheelchair and wheelchair to bed

A laboratory study was conducted in an effort to reduce back stress for nursing personnel while performing the patient handling tasks of transferring the patient from bed to wheelchair and wheelchair to bed. These patient handling tasks were studied using five manual techniques and three hoist-assis...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Ergonomics 1991-03, Vol.34 (3), p.289-312
Hauptverfasser: GARG, A., OWEN, B., BELLER, D., BANAAG, J.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A laboratory study was conducted in an effort to reduce back stress for nursing personnel while performing the patient handling tasks of transferring the patient from bed to wheelchair and wheelchair to bed. These patient handling tasks were studied using five manual techniques and three hoist-assisted techniques. The manual techniques involved one-person and two-person transfers. One manual technique involved a two-person lift of the patient under the arms; the others used a rocking and pulling action and included the use of assistive devices (a gait belt using a two-person transfer, a walking belt with handles using a one-person and a two-person transfer, and a patient handling sling with cutout areas to allow for a hand grip (Medesign( for a one-person transfer(. The three mechanical hoists were Hoyer, Trans-Aid and Ambulift. Six female nursing students with prior patient transfer experience served both as nurses and as passive patients. Static biomechanical evaluation showed that pulling techniques, as compared to lifting the patient, required significantly lower hand forces and produced significantly lower erector spinae and compressive forces at the L s /S 1 , disc (P≥0·01). Shear force, trunk moments and the percentage of females who were capable of performing the transfers (based on static strength simulation) also favoured pulling methods. Perceived stress ratings for the shoulder, upper back, lower back and whole body were lower for pulling methods than those for lifting the patient (P≤0·01). Patients found the pulling techniques, with the exception of when using the gait belt, felt more comfortable and more secure than the lifting method (P≤0·01). However, a number of subjects believed that the patient handling sling (Medesign) and the walking belt with one person making the transfer would not work for those patients who could not bear weight and those who were heavy, contracted or combative. A walking belt with two persons was the preferred manual method. Two out of three hoists (Hoyer lift and Trans-Aid) were perceived by the nurses to be as physically stressful as manual methods. Patients found these two hoists to be more uncomfortable and felt less secure than with three of the five manual methods (one- and two-person walking belts and Medesign). Ambulift was found to be the least stressful, the most comfortable, and the most secure among all eight methods. Pulling techniques and hoists took significantly longer amounts of time to make the t
ISSN:0014-0139
1366-5847
DOI:10.1080/00140139108967314