Decreasing the Impact–Abrasive Wear of Steel

Decreasing the Impact–Abrasive Wear of Steel

A new method of assessing the impact–abrasive resistance of steel permits simulation of the impact–abrasive wear with variation in the magnitude and inclination of the impact force, type of abrasive, and its grain size and rate of consumption. The influence of five carbide-forming elements on the pr...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Russian engineering research 2019-06, Vol.39 (6), p.480-484
Hauptverfasser: Bratkovskii, E. V., Shapovalov, A. N., Dema, R. R.
Format: Artikel
Sprache:eng
Schlagworte:
ABRASION
Abrasion resistant steels
Abrasive wear
ABRASIVES
CARBIDES
ENGINEERING
Engineering Design
GRAIN SIZE
HARDNESS
Impact loads
Impact resistance
INCLINATION
QUENCHING
SIMULATION
STEELS
VARIATIONS
WEAR RESISTANCE
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A new method of assessing the impact–abrasive resistance of steel permits simulation of the impact–abrasive wear with variation in the magnitude and inclination of the impact force, type of abrasive, and its grain size and rate of consumption. The influence of five carbide-forming elements on the properties of the cast and quenched steel is studied: specifically, attention focuses on the abrasion resistance, impact–abrasive resistance, and hardness of the steel. Optimal steel compositions with abrasion resistance and impact–abrasive resistance greater than that of 35GL steel are identified.
ISSN:1068-798X
1934-8088
DOI:10.3103/S1068798X19060091