Turning of F-4UV20 Composite Plastic

Turning of F-4UV20 Composite Plastic

The turning of F-4UV20 composite plastic is investigated. Continuous chip is formed in all the experimental conditions: cutting speed 16–100 m/min; supply 0.05–0.2 mm/turn; cutting depth 0.5–2 mm. The wear of the cutting insert is uniform (0.1 mm at the rear surface and 0.3 mm at the front surface),...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Russian engineering research 2019-10, Vol.39 (10), p.884-885
Hauptverfasser: Ablyaz, T. R., Matygullina, E. V., Sirotenko, L. D., Tokarev, D. I., Drozdov, A. A.
Format: Artikel
Sprache:eng
Schlagworte:
ADHESION
CARBON FIBERS
CUTTING
Cutting parameters
Cutting speed
Cutting wear
DEPTH
Engineering
Engineering Design
MATERIALS SCIENCE
MICROSTRUCTURE
PLASTICS
Product design
ROUGHNESS
SURFACES
Turning (machining)
WEAR
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The turning of F-4UV20 composite plastic is investigated. Continuous chip is formed in all the experimental conditions: cutting speed 16–100 m/min; supply 0.05–0.2 mm/turn; cutting depth 0.5–2 mm. The wear of the cutting insert is uniform (0.1 mm at the rear surface and 0.3 mm at the front surface), with no traces of adhesion. After turning, carbon fibers remain on the machined surface, conferring antifrictional properties without significant effect on the roughness.
ISSN:1068-798X
1934-8088
DOI:10.3103/S1068798X19100034