Evolution of grain boundary character distributions in alloy 825 tubes during high temperature annealing: Is grain boundary engineering achieved through recrystallization or grain growth?

Grain boundary engineering (GBE) of nickel-based alloy 825 tubes was carried out with different cold drawing deformations by using a draw-bench on a factory production line and subsequent annealing at various temperatures. The microstructure evolution of alloy 825 during thermal-mechanical processing (TMP) was characterized by means of the electron backscatter diffraction (EBSD) technique to study the TMP effects on the grain boundary network and the evolution of grain boundary character distributions during high temperature annealing. The results showed that the proportion of ∑3n coincidence site lattice (CSL) boundaries of alloy 825 tubes could be increased to >75% by the TMP of 5% cold drawing and subsequent annealing at 1050°C for 10min. The microstructures of the partially recrystallized samples and the fully recrystallized samples suggested that the proportion of low ∑CSL grain boundaries depended on the annealing time. The frequency of low ∑CSL grain boundaries increases rapidly with increasing annealing time associating with the formation of large-size highly-twinned grains-cluster microstructure during recrystallization. However, upon further increasing annealing time, the frequency of low ∑CSL grain boundaries decreased markedly during grain growth. So it is concluded that grain boundary engineering is achieved through recrystallization rather than grain growth. •The grain boundary engineering (GBE) is applicable to 825 tubes.•GBE is achieved through recrystallization rather than grain growth.•The low ∑CSL grain boundaries in 825 tubes can be increased to >75%.