Atomic layer deposition of Pt@CsH2PO4 for the cathodes of solid acid fuel cells

Atomic layer deposition (ALD) has been used to apply continuous Pt films on powders of the solid acid CsH2PO4 (CDP), in turn, used in the preparation of cathodes in solid acid fuel cells (SAFCs). The film deposition was carried out at 150 °C using trimethyl(methylcyclopentadienyl)platinum (MeCpPtMe3) as the Pt source and ozone as the reactant for ligand removal. Chemical analysis showed a Pt growth rate of 0.09 ± 0.01 wt%/cycle subsequent to an initial nucleation delay of 84 ± 20 cycles. Electron microscopy revealed the contiguous nature of the films prepared using 200 or more cycles. The cathode overpotential (0.48 ± 0.02 V at a current density of 200 mA/cm2) was independent of Pt deposition amount beyond the minimum required to achieve these continuous films. The cell electrochemical characteristics were moreover extremely stable with time, with the cathode overpotentials increasing by no more than 10 mV over a 100 h period of measurement. Thus, ALD holds promise as an effective tool in the preparation of SAFC cathodes with high activity and excellent stability. [Display omitted]