Cyclotron production of 68Ga in a liquid target: Effects of solution composition and irradiation parameters

To optimize 68Ga production using a liquid cyclotron target, investigations were performed to compare production yields using different concentrations of [68Zn]Zn(NO3)2, nitric acid, and irradiation parameters. Different concentrations of [68Zn]Zn(NO3)2 (0.6 M, 1.2 M and 1.42 M) in varying normality of nitric acid (0.8–1.5 N) were prepared and irradiated with protons (incident energy ~14 MeV) using a BMLT-2 liquid target at different beam currents (30–50 μA) and irradiation times (30–60 min). The 68Ga production and saturation yields were calculated and compared. [68Ga]GaCl3 was isolated using in-house developed hydroxamate resin and optimized for routine application. Recycling of [68Zn]Zn(NO3)2 from the recovered target solution was also investigated. On increasing concentration of [68Zn]Zn(NO3)2 from 0.6 M to 1.2 M in 0.8 N nitric acid, decay corrected yield of 68Ga at EOB was found to be 1.64 GBq (44.4 mCi) and 3.37 GBq (91.0 mCi), respectively at 30 μA beam current, indicating production yield was proportional to zinc nitrate concentration for a 30 min irradiation. However, when beam current was increased to 40 μA while maintaining nitric acid concentration at 0.8 N, the proportional relationship of 68Zn-concentration with 68Ga production yield was lost [0.6 M, 2.29 GBq (61.9 mCi); 1.2 M, 3.6 GBq (97.3 mCi)] for a 30 min irradiation. In fact, the effect was more profound for 60 min irradiations [0.6 M, 2.96 GBq (80.0 mCi); 1.2 M, 4.25 GBq (115 mCi)]. Increasing nitric acid concentration to 1.25–1.5 N improved 68Ga production yield for 40 μA, 60-min irradiations (1.2 M; 5.17 GBq (140 mCi)). MP-AES analysis showed metal impurities as