Additive Engineering for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have reached a certified 25.2% efficiency in 2019 due to their high absorption coefficient, high carrier mobility, long diffusion length, and tunable direct bandgap. However, due to the nature of solution processing and rapid crystal growth of perovskite thin films, a variety of defects can form as a result of the precursor compositions and processing conditions. The use of additives can affect perovskite crystallization and film formation, defect passivation in the bulk and/or at the surface, as well as influence the interface tuning of structure and energetics. Here, recent progress in additive engineering during perovskite film formation is discussed according to the following common categories: Lewis acid (e.g., metal cations, fullerene derivatives), Lewis base based on the donor type (e.g., O‐donor, S‐donor, and N‐donor), ammonium salts, low‐dimensional perovskites, and ionic liquid. Various additive‐assisted strategies for interface optimization are then summarized; additives include modifiers to improve electron‐ and hole‐transport layers as well as those to modify perovskite surface properties. Finally, an outlook is provided on research trends with respect to additive engineering in PSC development. Recent progress on additive engineering during perovskite film formation is reported according to the following common categories: Lewis acid, Lewis base, ammonium salts, low‐dimensional perovskites, and ionic liquid. Then, various additive‐assisted strategies for interface optimization are compared. Finally, an outlook on the research trends with respect to additive engineering in perovskite solar cell development is provided.