Thermal conductivity and erosion durability of composite two-phase air plasma sprayed thermal barrier coatings

To enhance efficiency of gas turbines, new thermal barrier coatings (TBCs) must be designed which improve upon the thermal stability limit of 7wt.% yttria stabilized zirconia (7YSZ), ~1200°C. This tenant has led to the development of new TBC materials and microstructures capable of improved high temperature performance. This study focused on increasing the erosion durability of cubic zirconia based TBCs, traditionally less durable than the metastable t′ zirconia based TBCs. Composite TBC microstructures composed of a low thermal conductivity/high temperature stable cubic Low-k matrix phase and a durable t′ Low-k secondary phase were deposited via APS. Monolithic coatings composed of cubic Low-k and t′ Low-k were also deposited, in addition to a 7YSZ benchmark. The thermal conductivity and erosion durability were then measured and it was found that both of the Low-k materials have significantly reduced thermal conductivities, with monolithic t′ Low-k and cubic Low-k improving upon 7YSZ by ~13% and ~25%, respectively. The 40wt.% t′ Low-k composite (40wt.% t′ Low-k — 60wt.% cubic Low-k) showed a ~22% reduction in thermal conductivity over 7YSZ, indicating even at high levels, the t′ Low-k secondary phase had a minimal impact on thermal conductivity in the composite coating. It was observed that a mere 20wt.% t′ Low-k phase addition can reduce the erosion of a cubic Low-k matrix phase composite coating by over 37%. Various mixing rules were then investigated to assess this non-linear composite behavior and suggestions were made to further improve erosion durability. •Monolithic and composite TBCs were fabricated using APS.•Coatings were composed of YSZ, t′ Low-k and cubic Low-k.•Cubic Low-k erosion rate can be reduced via t′ Low-k additions.•t′ Low-k additions have large (nonlinear) beneficial effects on cubic Low-k erosion.