Experimental Study on Mechanical Properties of Q690 High Strength Steel in Marine Corrosive Environment

In order to study the mechanical property degradation rule of Q690 high-strength steel in the ocean wave splash area, the rusted specimen is obtained by indoor damp heat surrounding soaking environment corrosion test. The scanning electron microscopy, uniaxial tensile and cyclic loading tests of corroded steel are performed. This paper analyzes the steel from elastic modulus, yield strength, ductility and law of hysteresis degradation under different corrosion cycles and establishes the constitutive model of HSS. The results show that the appearance of HSS is obviously affected by the corrosion cycle. With the increase of the corrosion cycle, reddish-brown flaky corrosion products are formed on the surface of the steel and there are obvious corrosion pits. After 100 days of corrosion, the corrosion rate of steel reached 7.21%; the elastic modulus and yield strength under uniaxial tension load decreased by 10.2% and 4.9%. Under the effect of cyclic reciprocating load, the hysteretic energy is reduced by 15.3%; at the same time, the test curve is fitted by the secondary plastic flow model and the Ramberg–Osgood model and it is found that the shape parameter S 1 and the cyclic strengthening coefficient K' are reduced by 20.1% and 10.2%, While the shape parameter S 2 and the cycle strengthening index n' have no obvious changes.