Physical property effects of the compression process with supercritical carbon dioxide as working fluid

The compressor is one of the key components in the closed supercritical carbon dioxide (S-CO 2 ) Brayton cycle, but its design method is far from mature. It is naturally expected that the well-established design method of the air compressor can provide favorable guidelines, on the basis of further understanding the effects of the physical property on the compressor flow field. Considering that isentropic compression is one of the core physical processes in the compressor, the physical property effects on this process were mainly investigated in this work. Similarity criterion was considered, and the change rate discrepancy of the main variables in this process between S-CO 2 and the ideal air was fully analyzed. Results show that S-CO 2 is compressed faster than the ideal air in most cases, along with generating smaller Mach number and larger pressure rise ratio. It is noted the important parameter of the static pressure coefficient distribution with S-CO 2 in the compression process is almost the same as that with the ideal air at low Mach number, which is conductive to the extension of the air compressor research experience, but it is quite different at high Mach number. The simulation cases about compressor cascade are further applied and prove the suitability of the revealed physical property effects in the compressor passage. Understanding these effects on the compression process is helpful to improve the design method of the S-CO 2 compressor.